Thermally Induced Vibration of Non-homogeneous Trapezoidal Plate Whose Thickness Varies Linearly in One and Parabolically in Other Direction with Linearly Varying Density
Keywords:
non-homogeneous problem, thickness, density, trapezoidal plate, frequenciesAbstract
Based on classical plate theory, the natural frequencies of thermally induced vibration of non-homogeneous trapezoidal plate with varying thickness linearly in x-direction and parabolically in y-direction has been calculated by Rayleigh–Ritz method. Due to linear variation in density non-homogeneity arises in plate’s material. The frequency equation has been obtained by assuming the two-term deflection function with clamped-simply supported- clamped-simply supported boundary condition. For a symmetric, non-homogeneous trapezoidal plate the effect of non-homogeneity constant, aspect ratios, thermal gradient and taper constants on the frequencies has been studied for first two modes of vibration. All the numerical results which have been obtained presented in tabular and graphical form.
Â
References
W. Nowac ki, Thermo Elasticity, Pergamon Press, New York, 1962.
S. M. Hassan, M. Makary, “Transverse vibrations of elliptical plate of linearly varying thickness with half of the boundary clamped and the rest simply supportedâ€, International Journal of Mechanical Sciences, vol.45, no.5, pp. 873-890, 2003.
S. Chakraverty, Ragini Jindal, V. K. Agarwal, “Vibration of non-homogeneous orthotropic elliptic and circular plates with variable thicknessâ€, Journal of Vibration and Acoustics, vol. 129, no. 2, pp. 256-259, 2007.
R. Lal, U. S. Gupta, C. Goel, “Chebyshev collocation method in the study of transverse vibrations of non-uniform rectangular orthotropic platesâ€, The Shock and Vibration Digest, vol. 33, no. 2, pp. 103-112, 2001.
P. A. A. Laura, R. H. Gutierrez, R. B. Bhat, “Transverse vibrations of a trapezoidal cantilever plate of variable thicknessâ€, AIAA Journal, vol. 27, no.7, pp. 921-922, 1989.
O.G. McGee, T.S. Butalia, “Natural Vibrations of shear deformable cantilevered skewed trapezoidal and triangular thick platesâ€, Computers and Structures, vol. 45, no.5-6, pp. 1033–1059, 1992.
N. Bhardwaj, A.P. Gupta, “Axisymmetric vibrations of polar orthotropic circular plates of quadratically varying thickness resting on elastic foundationâ€, International Journal of Structural Stability and Dynamics, vol. 5, no.3, pp.387-408, 2005.
Kavita, Satish Kumar, Pragati Sharma, “Study of Thermally Induced Vibration of Non-Homogeneous Trapezoidal Plate with Parabolically Thickness Variation in Both Directionsâ€, Applied Mathematics, vol. 7, no.12, pp. 1283-1296, 2016.
Kavita, Satish Kumar, Pragati Sharma, “Study of Temperature Behaviour on Thermally Induced Vibration of Non-Homogeneous Trapezoidal Plate with Bi-Linearly Varying Thicknessâ€, Journal of Applied Mathematics and Physics, vol. 4, no. 10, pp. 1936-1948, 2016.
K.M. Liew, M.K. Lim, “Transverse Vibration of Trapezoidal Plates of Variable Thickness: Symmetric Trapezoidsâ€, Journal of Sound and Vibration, vol. 165, no. 1, pp. 45-67, 1993.
K. Hosokawa, J. Xie, T. Sakata, “Free vibration analysis of cantilevered laminated trapezoidal platesâ€, Science and Engineering of Composite Materials, vol. 8, no. 1, pp. 1–10, 1999.
H. A. Larrondo, D. R. Avalos, P.A.A. Laura, R. E. Rossi, “Vibration of simply supported rectangular plates with varying thickness and same aspect ratio cutoutsâ€, Journal of Sound and Vibration, vol. 244, no.4, pp. 738-745, 2001.
A. K. Gupta, A. Kumar, Y. K. Gupta, “Vibration of visco-elastic parallelogram plate with parabolic thickness variationâ€, Applied Mathematics, vol. 1, no. 2, pp. 128-136, 2010.
A. Y. T. Leung, C. Xiao, B. Zhu, S. Yuan, “Free vibration of laminated composite plates subjected to in-plane stresses using trapezoidal p-elementâ€, Composite Structures, vol.68, no.2, pp.167–175, 2005.
A. K. Gupta, A. Khanna, S. Kumar, M. Kumar, D. V. Gupta, P. Sharma, “Vibration analysis of visco-elastic rectangular plate with thickness varies linearly in one and parabolically in other directionâ€, Advanced Studies in Theoretical Physics, vol. 4, no. 15, pp. 743–758, 2010.
A. K. Gupta, P. Sharma, “Thermal Effect on vibration on non-homogeneous trapezoidal plate of linearly varying thicknessâ€, International Journal of Applied Mathematics and Mechanics, vol. 7, no. 20, pp. 1-17, 2011.
A. K. Gupta, P. Sharma, “Study the Thermal Gradient Effect on Frequencies of a Trapezoidal Plate of Linearly Varying Thicknessâ€, Applied Mathematics, vol. 1, no. 5, pp. 357-365, 2010.
Downloads
Published
Issue
Section
License
- Papers must be submitted on the understanding that they have not been published elsewhere (except in the form of an abstract or as part of a published lecture, review, or thesis) and are not currently under consideration by another journal published by any other publisher.
- It is also the authors responsibility to ensure that the articles emanating from a particular source are submitted with the necessary approval.
- The authors warrant that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required.
- The authors ensure that all the references carefully and they are accurate in the text as well as in the list of references (and vice versa).
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Attribution-NonCommercial 4.0 International that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
- The journal/publisher is not responsible for subsequent uses of the work. It is the author's responsibility to bring an infringement action if so desired by the author.