Analysis Residual Strength of Post Fire Concrete
Keywords:
post fire concrete, residual strength, heatingAbstract
The study is experimental to describe the residual strength of post fire concrete. The research was conducted in the laboratory by heating the concrete sample in the oven with temperature 400oC and 600oC for 3 hours, 6 hours and 9 hours. The results show that concrete after burning with heating 600oC causes slight residual strength or below 60%. This condition indicates that concrete that has been fired or heated above 600oC temperature is not feasible for reuse. In 400°C concrete combustion, concrete strength more than 35 Mpa shows the residual strength of over than 60%. This condition indicates that concrete that has been fired or heated to a temperature of less than 400oC is feasible for reuse, but with construction improvementsReferences
V. Kodur, “Properties of concrete at elevated temperatures,†ISRN Civ. Eng., vol. 2014, 2014.
C. Fleischmann, A. Buchanan, and A. Abu, “Analytical methods for determining fire resistance of concrete members,†in SFPE Handbook of Fire Protection Engineering, Springer, 2016, pp. 1949–1978.
K. Sakr and E. El-Hakim, “Effect of high temperature or fire on heavy weight concrete properties,†Cem. Concr. Res., vol. 35, no. 3, pp. 590–596, 2005.
Y.-F. Chang, Y.-H. Chen, M.-S. Sheu, and G. C. Yao, “Residual stress–strain relationship for concrete after exposure to high temperatures,†Cem. Concr. Res., vol. 36, no. 10, pp. 1999–2005, 2006.
I. A. Ahmad, N. A. S. Taufieq, and A. H. Aras, “Analisis Pengaruh Temperatur terhadap Kuat Tekan Beton,†J. Tek. Sipil, vol. 16, no. 2, pp. 63–70, 2009.
S. Yin, R. Tuladhar, T. Collister, M. Combe, N. Sivakugan, and Z. Deng, “Post-cracking performance of recycled polypropylene fibre in concrete,†Constr. Build. Mater., vol. 101, pp. 1069–1077, 2015.
R. H. Haddad and L. G. Shannis, “Post-fire behavior of bond between high strength pozzolanic concrete and reinforcing steel,†Constr. Build. Mater., vol. 18, no. 6, pp. 425–435, 2004.
L. Li, P. Jia, J. Dong, L. Shi, G. Zhang, and Q. Wang, “Effects of cement dosage and cooling regimes on the compressive strength of concrete after post-fire-curing from 800° C,†Constr. Build. Mater., vol. 142, pp. 208–220, 2017.
Downloads
Published
Issue
Section
License
- Papers must be submitted on the understanding that they have not been published elsewhere (except in the form of an abstract or as part of a published lecture, review, or thesis) and are not currently under consideration by another journal published by any other publisher.
- It is also the authors responsibility to ensure that the articles emanating from a particular source are submitted with the necessary approval.
- The authors warrant that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required.
- The authors ensure that all the references carefully and they are accurate in the text as well as in the list of references (and vice versa).
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Attribution-NonCommercial 4.0 International that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
- The journal/publisher is not responsible for subsequent uses of the work. It is the author's responsibility to bring an infringement action if so desired by the author.
