Effects of Stem Moisture Content, Length of Lever Arm, Region of Cut and Cutting Attempts on the Cutting Efficiency of a Push-Type Cassava Stem Cutter and Harvester
DOI:
https://doi.org/10.24203/ajafs.v8i5.6295Keywords:
A Cassava harvester, cutter, efficiency, moisture, region of cut, stemAbstract
I Cassava harvesting is viewed as the most arduous operation in its production chain, involving three main sequential operations from stem cutting, soil loosening and then uprooting of the tubers. A semi-mechanised cassava stem cutter and harvester was developed to aid mitigate the drudgery involved in cassava harvesting. The machine was designed to carry out three main operations which include stem cutting, soil loosening and tuber harvesting. A precise knowledge of agronomic, physical and mechanical properties of the stem and factors affecting cassava harvesting most especially stem cutting plays a vital role in an attempt to overcome the existing challenges associated with the harvesting. The effects of stem girth, region of cut, cutting attempts and stem moisture content on cutting efficiency was investigated. The result of the experiment revealed that the cutting efficiency ranged from 3 to 99.5%. The highest cutting efficiency of 99.5% was obtained from combination of stem moisture content of 85%, length of lever arm from fulcrum of 65 cm, region of cut above ground level of 30 cm and number of cutting attempts 3. The lowest cutting efficiency of 3% was obtained from combination of stem moisture content of 45%, length of lever arm from fulcrum of 65 cm, region of cut above ground level of 30 cm and number of cutting attempts 3. The optimization process produced solutions whose desirability equals to 1 and the selected (most desirable) condition was found to be: stem moisture content (75%), length of lever arm from fulcrum (70 cm), region of cut above ground level (40 cm) and cutting attempts (4), with cutting efficiency and desirability of 99.5% and 0.959 respectively. These findings are vital knowledge necessary in the development of cassava stem cutting and harvesting equipment.
References
Felber, C., Azouma, O. Y. and Reppich, M., “Evaluation of Analytical Methods for the Determination of the Physicochemical Properties of Fermented, Granulated and Roasted Cassava pulp, Garri”, Journal of Food Science and Nutrition, vol, 5, no. 1, pp. 46 – 53, 2016.
Addy, P. S., Kashaija, I. N., Moyo, M. T., Quynh, N. K., Singh, S., and Walekhwa, P. N., Constraints and Opportunities for Small and Medium Scale Processing of Cassava in the Ashanti and BrongAhafo regions of Ghana. Working document series, International Centre for Development Oriented Research In Agriculture, vol, 117, pp. 60 – 69, 2014.
Ennin, S. A., Otoo, E. and Tetteh, F. M., “Ridging: A Mechanized Alternative to Mounding for Yam and Cassava Production”, West African Journal of Applied Ecology, vol, 15, pp. 1 – 8
Amponsah, S. K., Bobobee, E. Y. H., Agyare, W. A., Okyere, J. B., Aveyire, J., King, S. R, and Sarkodie-Addo, J., “Mechanical Cassava Harvesting as influenced by Seedbed Preparation and Cassava Variety”, Applied Engineering in Agriculture, vol. 30, no. 3, pp. 391-403, 2014.
Xue, Z., Zhang, J., Zhang. Y.L., Li, C.B. and Chen, S., “Test and Analysis on the Mechanical Properties of Cassava Stalks”, Journal of Animal and Plant Sciences, vol. 25, no. 3, pp. 59 – 67.
Kaewwinud, N., Khokhajaikiat, P. and Boonma, A., “Effect of Moisture and Region of Cut on Cassava Stalk Properties in Biomass Application”, Res. Agr. Eng., vol. 63, pp. 23 – 28.
Egbe-Ogbengi, I.S and Agidi, G., “Development of a Hand Push-Type Cassava Harvester”, Journal of Agricultural Engineering and Technology (JAET), vol. 24, no. 2, pp. 44 – 52.
Babatunde O. S., Olugboyega C. A, and Leo Ayodeji S. A. “Determination of some physical and mechanical properties of soybean and maize in relation to planter design”, Agric Eng Int: CIGR Journal, vol. 20, no. 1, pp. 81-89, 2018.
Gana I. M., Gbabo A., Peter A. I. and Anounye J. C. “Influence of Soaking on Moisture – Dependent Physical Properties of Some Selected Grains Essential to Design of Grain Drinks Processing Machine”, TI Journals Agriculture Science Developments., vol. 3, no. 7, pp. 237-243, 2014.
Tran, H.T., Phan, T.C.L., Tran, T.A.T., Ho, T.T., Le, T.V.H., Bui, H., “Using Central Composite Design—Response Surface Methodology to Optimize Inveratse Activity Condition For Fructose Production. Conference Proceedings of Biotechnology for Green Solutions and Sustainable Environment”, pp. 82–87, 2010.
Gana I. M, Agidi G, Idah P. A. and Anuonye J. C. “Development and testing of An Automated Grains Drinks Processing Machine”, Food and Bioproducts Processing, vol. 104, pp. 19 – 31, 2017.
Ogunlowo, Q. O. and Olaoye J. O., “Development and Performance Evaluation of a Guided Horizontal Conveyor Rice Harvester”, Agrosearch, vol. 17, no. 1, pp. 66– 88, 2017.
Aworanti, O.A., Agarry, A.O., Ajani, A.O., “Statistical Optimization of Process Variables for Biodiesel Production from Waste Cooking Oil using Heterogeneous Base Catalyst”, Br. Biotechnol. Journal, vol. 3, no. 2, pp. 116–132, 2013.
Xin, L., Saka, S., “Optimization of Japanese Beech Hydrolysis Treated with Batch Hot Compressed Water by Response Surface Methodology”, Int. J. Agric. Biol. Eng., vol. 1, no. 2, pp. 239–245, 2008.
Chih, W.T., Lee, I.T., Chung, H.W., “Optimization of Multiple Responses Using Data Envelopment Analysis and Response Surface Methodology”, Tamkang J. Sci. Eng., vol. 13, no. 2, pp. 197–203, 2017.
Downloads
Published
Issue
Section
License
Copyright (c) 2020 I. M. Gana, A. Gbabo, I. S. Egbe-Okpenge
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
- Papers must be submitted on the understanding that they have not been published elsewhere (except in the form of an abstract or as part of a published lecture, review, or thesis) and are not currently under consideration by another journal published by any other publisher.
- It is also the authors responsibility to ensure that the articles emanating from a particular source are submitted with the necessary approval.
- The authors warrant that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required.
- The authors ensure that all the references carefully and they are accurate in the text as well as in the list of references (and vice versa).
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Attribution-NonCommercial 4.0 International that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
- The journal/publisher is not responsible for subsequent uses of the work. It is the author's responsibility to bring an infringement action if so desired by the author.
