Effect of Different Processing Methods on Proximate, Functional and Pasting Properties of Plantain Flour
Keywords:
Plantain flour, blanching, fermentation, proximate, pasting, functional and sensory properties.Abstract
The effect of different processing methods on functional and physico-chemical properties of plantain flour was investigated. Flours were prepared from unripe matured plantain Musa spp. (Agbagba variety) which was subjected to different processing methods of blanching, natural fermentation, lacto- fermentation and raw unripe plantain which serves as the control. The natural and lacto-fermented plantain flakes was allowed to take place for 48 h while the blanched plantain flakes was blanched at 850C for 5min before they were oven dried 600C for72h and then milled into flour. The flours are examined for their proximate composition, functional properties, pasting characteristics and sensory evaluation of gruels made from each plantain flour sample. The sensory evaluation shows there is significant difference between the control and plantain flour samples in terms of colour and texture, the overall acceptability indicate the control is ranked the highest while the lacto-fermented flour gruels was ranked the least, this maybe due to the fact that lacto-fermented plantain flour is a new modification of plantain flour.The solubility of the flour samples ranged between 8.47-12.17%, least gelation 4.0-6.0%, water absorption capacity 146.67-180.00%, bulk density (loosed) 0.35-0.36g/ml, bulk density (packed) 0.56-0.59g/ml, titratable acidity 0.21-0.55 % and pH ranges between 7.05-7.28. Proximate analysis showed that the samples were low in moisture, crude fat, ash and crude fibre but high in carbohydrate and slightly high in protein. Blanching improves least gelation and bulk density which implies that the blanched plantain flour will be a good binder and more useful as a meat extender, natural fermentation also improves the breakdown viscosity at 37.00RVU and lower breakdown viscosity indicate paste stability of the starch gel during cooking, lacto-fermentation improves gelation and WAC but it has low effect on the setback during pasting analysis.
References
• Adebesin A.A., Odebode, C.A.and Ayodele, A.M. (2009): Control of postharvest rots of banana fruits by candida and culture filtrates of Trichoderma asperellum. J.Plant protection res. 49(3): 302-308.
• Adebowale, Y.A., Adeyemi, I.A., and Oshodi, A.A.(2005): Functional and physico-chemical properties of flour of six mucuna species. Afr. J of Biotech 4(12): pg 1461-1468.
• Adeyemi, I.A., 1989. Cereals as food and industrial raw materials. In: Aribisala, O.A. and B.N. Olorunfemi (Eds.). Proceedings of the first meeting of the Action Committee on Raw Materials Raw Materials Research and Development Council. Lagos, Nig., pp: 131-138.
• Akinwumi, J.A. (1999): Agric. Economic and Marketing, Introduction to Tropical Agriculture Longman Group Ltd; pp. 70.
• AOAC, (2000): Official Method of analysis 17th Edition volume I. Association of official analytical chemists, Inc, Maryland, USA.
• Baiyeri, K.P. and Oritz, R. (2000).Agronomic evaluation of plantain and other triphoid mus.In: K.Craenen, R.Ortiz, E.B.Karannra and D.R.Vuylsteke (eds). Proceeding of first international conference of Banana and plantain in Africa, Kampala, Uganda, 12-18 October, 1996. International Society for Horticulture, 540. Pg. 125-135.
• Dadzie, B.K. (1998): Post harvest characteristics of black sigatoka resistant banana, cooking banana and plantain hybrids. INIBAP Technical Guidelines, pp: 75.
• Downing D.L. (2003): Canning Operations. In: A complete course in canning and related processes: Book 1. Fundamental Information on canning, 13th Ed; CTI Publications, In: MD, pg. 269-272.
• Egan, H., Kirk, R.S., and Sawyer, R.(1981): Pearson’s chemical analysis of food, 8th ed. Churchill Livingstone, Medical division of Longman Group Ltd. Great Britain. Pg 591.
• Emperatriz, P.D., Ronald, M., Elevina, P., and Mily. S. (2008): Production and characterization of unripe plantain (musa paradisiacal L) flours. Intercienca, 33: pp. 290-296.
• Folayan, J.A. and Bifarin, J.O. (2011); Economic analysis of plantain processing industry in Akure South Local Government of Ondo State. J. Agric. Extension Rural Dev. 3(4): pg. 77-81.
• Giami, S.Y, 1993. Effects of processing on the proximate Composition and functional Properties of cowpea (Vigna unquiculata) flour, Food Chem. 47: 153-158.
• Horsfall, D.M., Lucy, E. and Nwaojigwa, S.U. (2005): Chemical composition, functional and baking properties of Wheat-Plantain composite flours. Pg. 8
• Ihekoronye, A.I., and Ngoddy, P.O.(1985): Integrated food science and technology for the tropics. First Edition McMillan publishers.Pg 261-291.Inc, cay, NC, U.S.A.
• ICMSF (1978) Microorganisms in Foods: Their significance and Methods of Enumeration. University of Toronto Press.
• INIBAP (2001): The many uses of banana. International Network for the improvement of banana and plantain, pg.1
• Iwe, M.O. and O.O. Onadipe, 2001.Effect of addition of extruded full-fat soy flour into sweet potato flour on functional properties of the mixture, J. Sustain. Agri. Environ., 3: 109- 117.
• Kulkani, K.D., D.N. Kulkani and U.M Ingle, 1991. Sorghum malt-based weaning food formulations: Properties, functional properties, nutritive value. Food Nutr. Bull., 13: 322- 329
• Lin, M.J.Y., Humbert, E.S., and Sulski, S.O. (1974): Certain functional properties of sunflower meal products. Journal of Food Science 39: pg 368.
• Maziya- Dixon, B., Dixon A.G.O., and Adebowale, A.A. (2004): Targeting different end uses of cassava: Genotypic variations for cyanogenic potentials and pasting properties. A paper presented at ISTRC-AB symposium, 31stoct- 5thNov, 2004. Whitesands hotel, mombassa-kenya.
• Naven. K (2010): Textbook Microbiology by IK International Publishing House Pvt. Ltd; pg 206
• Nelson, S.C.Ploetz, R.C., Kepler, A.K. (2006). Musa specie (bananas and plantains), In: Elevitch CR (ed) species profiles for pacific Island Agroforestry. Permanent Agriculture Resources (PAR), Holualoa, Hawaii. (http://www.traditionaltree.org.).
• Newport Scientific (1998): Applications manual for the rapid visco TM analyzer using thermocline for windows. Newport scientific pty Ltd,½ Apollo street, Warriewood WSW 2102, Australia, pg. 2-26.
• Ngalani, J.A. and Crozet, J. (1995). Utilization de la farine de banana plantain dans la fabrication de pains biscuits etfarinesinstautanees. Cahiers Agricultures 4: pg 61-64.
• Oduro, I., Ellis, W.O.; Dzomeku, B.M., Darko-Mensah, K. and Anno-Nyako, F.O. (2006): Agronomic and Physiochemical Evaluation of FHIA-03 (Hybrid Cooking Banana) in Ghana. Journal of Ghana Sciences Vol.8.No. 1; pg 127-134.
• Okaka, J.C., Anosike, G.N., and Okaka, A.N.C (1997): Effect of particle size profile of sundried and ovendried cowpea flours on their physical and functional characteristics on model systems. J.Sci. Tech, pp. 65-74
• Okerie.B.O., Bello, A.B,1988. Physicochemical and functional Properties of Winged bean flour and isolate compared with Soy isolate. J. Food Sci. 53: 450-454.
• Onwuka, G.I., and Onwuka, N.D., (2005): The effects of ripening on the functional properties of plantain and plantain based cake. Int. J. Food properties 8: pg 347-354.
• Padmashree, JS, Vuayakshmi, L, Shashikala P, 1987. Effect of traditional processing on the functional properties of cowpea (VignaCat Juan) four, J. Food Sci. Technol. 24: 221-224.
• Phillip, B., Shittu, A.M., Aiyelaagbe, I.O., Addokun, T. (2009).Economic potentials of plantain and fluted pumpkin intercropping as a poverty reduction strategy in South-Western Nigeria. World J. Agric. Sci. 5(5): 525-534.
• Sally, F. and Mary, G. Eniy (1999).The cookbook that challenges politically correct nutrition and the diet dictocrats.New Trends Publishing and Amazon.com.
• Sandhu, K.S., Singh, N and Malhi, N.S. (2007): Some properties of corn grains and their flours 1: physico-chemical, functional and chapatti- making properties of flours. Food Chem. 101: pp. 938-946.
• Sosulski, F.W., (1962): The centrifuge methods for determining flour absorption in hard red spring wheat. Cereal Chem. 39: pg344-34
• SON (2007): Nigerian Industrial Standard for biscuits. ICS: 664.68, Standard Organization of Nigeri
Downloads
Published
Issue
Section
License
- Papers must be submitted on the understanding that they have not been published elsewhere (except in the form of an abstract or as part of a published lecture, review, or thesis) and are not currently under consideration by another journal published by any other publisher.
- It is also the authors responsibility to ensure that the articles emanating from a particular source are submitted with the necessary approval.
- The authors warrant that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required.
- The authors ensure that all the references carefully and they are accurate in the text as well as in the list of references (and vice versa).
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Attribution-NonCommercial 4.0 International that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
- The journal/publisher is not responsible for subsequent uses of the work. It is the author's responsibility to bring an infringement action if so desired by the author.
