Vector Fitting-Based Models of Vertical and Horizontal Electrodes under Lightning Strikes to Interface with EMTP

Authors

  • M. Kazemi
  • S. R. Ostadzadeh

Keywords:

Grounding system, EMTP, Vector fitting

Abstract

In this paper, wide band circuit models based on vector fitting method are proposed for the grounded vertical and horizontal electrodes. At first, the input impedance of the electrodes in the frequency domain is computed by accurate methods such as the method of moments (MoM). The circuit models are then achieved through converting input impedance of the electrodes to rational functions via vector fitting method. These functions are formed in such a way that at first a set of starting poles in the frequency range of interest are chosen, and then the locations of poles are reformed via an iteration process. Finally, these rational functions are converted to equivalent circuits in time domain and then imported into EMTP software for modeling the ground systems so that transient voltage is efficiently evaluated.

References

Leonid Grcev, Modeling of Grounding Electrodes under Lightning Currents, IEEE Trans. Electromagn. Compat, vol. 51, NO. 3, Aug 2009.

Thottappillil, “An Improved Transmission-Line Model of Grounding System,†IEEE Trans. Electromagn. Compat, vol. 43, no. 3, Aug 2001.

Leonid Grcev, and Marjan Popov, “On High-Frequency Circuit Equivalents of a Vertical Ground Rod,†IEEE Trans. Power Del, vol. 20, NO. 2, April 2005.

Majid Akbari, et al, “The Effect of Frequency Dependence of Soil Electrical Parameters on the Lightning Performance of Grounding Systems,†IEEE Trans. On Electro Mag. Compat., Vol. 55, No. 4, 2013.

S. Visacro, “A Comprehensive Approach to the Grounding Response to Lightning Currents,†IEEE Trans. On Power Delivery, Vol. 22, No. 1, pp. 381-386, 2007.

M. I. Lorentzu, et al, “Time Domain Analysis of Grounding Electrodes impulse Response,†IEEE Trans. Power. Del., Vol. 18, pp. 517-524, 2003.

Fi Rachidi et al, “Current Electromagnetic Field Associated with Lightning Return Strokes to Tall Towersâ€, IEEE Trans. Electromagn. Compat, Vvol. 43, No. 3, pp: 356-367, Aug 2001.

Bjorn Gustavsen, and Adam Semlyen, “Rational Approximation of Frequency Domain Responses By Vector Fittingâ€, IEEE Transaction on Power Delivery, Vol. 14, No. 3, 1999. , No. 2, pp. 517-524, 2003.

Bjorn Gustavsen, and Adam Semlyen, “Enforce Passivity for Admittance Matrices Approximated By Rational Functionsâ€, IEEE Transaction on Power Delivery, Vol. 16, No. 1, 2001.

Bjorn Gustavsen, “Improving the Pole Relocating Properties of Vector Fittingâ€, IEEE Transaction on Power Delivery, Vol. 21, No. 3, 2006.

K. Sheshyekani et al, “Frequency Domain Analysis of Ground Electrodes Buried in an Ionized Soil due to Lightning Surge Currentâ€, 29th Int conf. on Lightning protection, June, 2008.

K. Sheshyekani et al, “Frequency Domain Analysis of Ground Electrodes Buried in an Ionized Soil Subjected to Lightning Surge Currents: A MoM-AOM Approach,,†J. Electr. Power Syst. Res., Vol. 81, No. 2, pp. 290-296, 2011.

R.F. Harrington, Field Computation by Moment Methods, Macmillan, New York, 1968.

P. L. Bellasch et al, “Impulse and 60-cycle Characteristic of Driven Grounds-IIâ€, AIEE Trans. Vol. 61, pp: 349-363, 1942.

A. F. Imec, “Modeling Guidelines for fast front Transients,†IEEE Trans on Power Delivery, Vol. 11, No. 1, pp. 493-506, 1996.

Downloads

Published

2015-02-15

How to Cite

Vector Fitting-Based Models of Vertical and Horizontal Electrodes under Lightning Strikes to Interface with EMTP. (2015). Asian Journal of Fuzzy and Applied Mathematics, 3(1). https://ajouronline.com/index.php/AJFAM/article/view/2131