Optimization of Performance and Emissions of a Diesel Engine Fuelled with Rubber Seed- Palm Biodiesel Blends using Response Surface Method
Keywords:
Response surface methodology, hydrodynamic cavitation reactor, biodiesel, performance, emissionsAbstract
The effects of engine speed and load, and fuel blend ratio on the emissions and performance of an IDI (indirect injection) diesel engine were investigated. A 50:50 vol. blend of rubber seed and palm oils was used for the biodiesel production to reduce costs and enhance properties. Oil acid was reduced from 33.4 to 1.42 mg KOH/g oil by esterification followed by a transesterification in a hydrodynamic cavitation reactor. Blends of 0- 40 vol. % biodiesel to a diesel with 10% increments were prepared. Statistical tool, BBD (Box-Behnken design) based on a RSM (response surface methodology) was used to assess the combined effects of variables on parameters such as BT (torque), BP (power), BSFC (brake specific fuel consumption), BTE (brake thermal efficiency), CO, CO2, NOx, EGT (exhaust gas temperature) and O2. The engine load was found to be the most influential parameter compared to the engine speed and fuel blend. The engine speed was found to have a strong effect on performance and emissions except on BT and O2. The fuel blend effect was less significant except for BSFC, BTE, CO and CO2. On average biodiesel blends showed lower BT (0.97- 1.6%), BP (0.94- 1.4%), BTE (0.76-1.5%) and CO (0.93-6.7%) but higher BSFC (0.93- 1.7%), CO2 (0.95- 1.1%), NOx (0.97- 1.2%), EGT (1.1- 1.3%) and O2 (0.3- 1.2%) compared to diesel fuel. An optimum desirability value of 0.96 was achieved with fuel blend of 18 % (biodiesel to diesel), engine speed of 2320 rpm and engine load of 82% for the tested IDI engine.References
Ahmed, K.N., el Dessouky, H. Prospect of biodiesel in Pakistan, Renewable and Sustainable Energy Reviews, 2009. 13: pp. 1576–1583.
Adam, I.K., A.Aziz, A.R., Yusuf, S. Effect of Rubber Seed Oil and Palm Oil Biodiesel Diesel Blends on Diesel Engine Emission and Combustion Characteristics, Applied Mechanics and Materials, 2014. 695: pp. 323-327.
Wendy, N., Pei Qin, Hon Loong, L., Yusup, S. Supply network synthesis on rubber seed oil utilisation as potential biofuel feedstock, Energy, 2013. 55: pp. 82-88.
Sarin, R., Sharma, M., Sinharay, S., Malhotra, R.K. Jatropha – Palm biodiesel blends : An optimum mix for Asia, Fuel, 2007. 86: pp. 1365-1371.
Amit, S., Arora, R., Singh, N.P., Sarin, R., Malhotra, R.K., Kundu, K. Effect of blends of Palm-Jatropha-Pongamia biodiesels on cloud point and pour point, Energy, 2009. 34: pp. 2016-2021.
Amit, S., Arora, R., Singh, N.P., Sarin, R., Malhotra, R.K. Blends of biodiesels synthesized from non-edible and edible oils: Influence on the OS (oxidation stability), Energy, 2010. 35 (8): pp. 3449-3453.
Jena, R.H., Jadav, P.C., Snehal, S. Performance of a diesel engine with blends of biodiesel ( from a mixture of oils ) and high-speed diesel, International Journal of Energy and Environmental Engineering, 2013. 4 (1): pp. 1-1.
Yi, C.H., Han, C.T., Hong, C.J. An optimum biodiesel combination: Jatropha and soapnut oil biodiesel blends, Fuel, 2012. 92 (1): pp. 377-380.
Eka, H.D., Tajul, A.Y., Wan, N., W. A. Potential use of Malaysian rubber (Hevea brasiliensis) seed as food, feed and biofue, International Food Research Journal 2010. 17: pp. 527-534.
Ashraful, A.M., Masjuki, H.H., Kalam, M.A., Rizwanul Fattah, I.M., Imtenan, S., Shahir, S.A., et al. Production and comparison of fuel properties, engine performance, and emission characteristics of biodiesel from various non-edible vegetable oils: A review, Energy Conversion and Management, 2014. 80: pp. 202–228.
Ramadhas, A.S., Jayaraj, S., Muraleedharan, C. Biodiesel production from high FFA rubber seed oil, Fuel, 2005. 84: pp. 335-340.
Yang, R., Su, M., Zhang, J., Jin, F., Zha, C., Li, M., et al. Biodiesel production from rubber seed oil using poly ( sodium acrylate ) supporting NaOH as a water-resistant catalyst, Bioresource Technology, 2011. 102: pp. 2665-2671.
Ahmad, J., Yusup, S., Bokhari, A., Nik Mohammad Kamil, R. Study of fuel properties of rubber seed oil based biodiesel, Energy Conversion and Management, 2014. 78: pp. 266–275.
Morshed, M., Ferdous, K., Khan R., M., Mazumder, M.S.I., Islam, M.A., Uddin, M.T. Rubber seed oil as a potential source for biodiesel production in Bangladesh, Fuel 2011. 90: pp. 2981–2986.
Ramadhas, A.S., Jayaraj, S., Muraleedharan, C. Characterization and effect of using rubber seed oil as fuel in the compression ignition engines, Renewable Energy, 2005. 30: pp. 795-803.
Nagaraja, S., Sakthivel, M., Sudhakaran, R. Combustion and performance analysis of variable compression ratio engine fueled with preheated palm oil-diesel blends, Indian Journal of Chemical Technology, 2013. 20 (3): pp. 189-194.
Necati, O.A., Mustafa, C., Turkcan, A., Sayin, C. Performance and combustion characteristics of a DI diesel engine fueled with waste palm oil and canola oil methyl esters, Fuel, 2009. 88 (4): pp. 629-636.
Liaquat, A.M., Masjuki, H.H., Kalam, M.A., Fazal, M.A., Khan, A.F., Fayaz, H., et al. Impact of palm biodiesel blend on injector deposit formation, Applied Energy, 2013. 111: pp. 882-893.
Satyanarayana, M., Muraleedharan, C. Investigations on Performance and Emission Characteristics of Vegetable Oil Biodiesels as Fuels in a Single Cylinder Direct Injection Diesel Engine, Energy Sources Part A-Recovery Utilization and Environmental Effects, 2012. 34 (1-4): pp. 177-186.
Haas, M.J., Scott, K.M., Alleman, T., L., McCormick, R.L. Engine Performance of Biodiesel Fuel Prepared from Soybean Soapstock: A High Quality Renewable Fuel Produced from a Waste Feedstock, Energy & Fuels, 2001. 15: pp. 1207-1212.
Bhattacharya, M., Jain, S.C., Gakkhar, R.P., Win, Z. Parameter optimization of a diesel engine to reduce noise, fuel consumption, and exhaust emissions using response surface methodology, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 2005. 219 (10): pp. 1181-1192.
Pandian, M., Sivapirakasam, S.P., Udayakumar, M. Investigation on the effect of injection system parameters on performance and emission characteristics of a twin cylinder compression ignition direct injection engine fuelled with pongamia biodiesel–diesel blend using response surface methodology, Applied Energy, 2011. 88: pp. 2663–2676.
Sivaramakrishnan, K., Ravikumar, P. Optimization of operational parameters on performance and emissions of a diesel engine using biodiesel, Int. J. Environ. Sci. Technol., 2014. 11: pp. 949–958.
Hirkude, J.B., Padalkar, A.S. Performance optimization of CI engine fuelled with waste fried oil methyl ester-diesel blend using response surface methodology, Fuel, 2014. 199: pp. 266–273.
Rahman, M., Md.,, Hassan, M., Hj., Abul Kalam, M., Atabani, A., Emad, Memon, L., Ali , Rahman, A.S.M. Performance and emission analysis of Jatropha curcas and Moringa oleifera methyl ester fuel blends in a multi-cylinder diesel engine, Journal of Cleaner Production, 2014. 65: pp. 304-310.
Sanjid, A., Hassan, M.H., Kalam, M.A., Rahman, A.S.M., Abedin, M.J., Palash, S.M. Production of palm and jatropha based biodiesel and investigation of palm-jatropha combined blend properties, performance, exhaust emission and noise in an unmodified diesel engine, Journal of Cleaner Production, 2014. 65: pp. 295-303.
Ashrafur, R., S. M. , Hassan, M., H. , Kalam, M.A., Abedin, M.J., Sanjid, A., Sajjad, H. Production of palm and Calophyllum inophyllum based biodiesel and investigation of blend performance and exhaust emission in an unmodified diesel engine at high idling conditions, Energy Conversion and Management, 2013. 76: pp. 362-367.
Çelikten, I., Mutlu, E., Solmaz, H. Variation of performance and emission characteristics of a diesel engine fueled with diesel, rapeseed oil and hazelnut oil methyl ester blends, Renewable Energy, 2012. 48: pp. 122- 126.
Çelikten, I., Koca, A., Arslan, A.M. Comparison of performance and emissions of diesel fuel, rapeseed and soybean oil methyl esters injected at different pressures, Renewable Energy 2010. 35: pp. 814– 820.
Habibullah, M., Masjuki, H.H., Kalam, M.A., Fattah, I.M.R., Ashraful, A.M., Mobarak, H.M. Biodiesel production and performance evaluation of coconut, palm and their combined blend with diesel in a single-cylinder diesel engine, Energy Conversion and Management, 2014. 87: pp. 250–257.
Arbab, M.I., Varman, M., Masjuki, H.H., Kalam, M.A., Imtenan, S., Sajjad, H., et al. Evaluation of combustion, performance, and emissions of optimum palm–coconut blend in turbocharged and non-turbocharged conditions of a diesel engine, Energy Conversion and Management, 2015. 90: pp. 111–120.
Usta, N., Ozturk, E., Can, O., Conkur, E.S., Nas, S., Con, A.H., et al. Combustion of biodiesel fuel produced from hazelnut soapstock/waste sunflower oil mixture in a Diesel engine, Energy Conversion and Management, 2005. 46 (5): pp. 741-755.
Öztürk, E. Performance, emissions, combustion and injection characteristics of a diesel engine fuelled with canola oil–hazelnut soapstock biodiesel mixture, Fuel Processing Technology, 2015. 129: pp. 183-191.
Mustafa, O., Hasan, S. Evaluation of soybean/canola/palm biodiesel mixture as an alternative diesel fuel, Journal of Scientific & Industrial Research, 2011. 70 (6): pp. 466-470.
Srithar, K., Arun, B., K , Pavendan, V., Ashok, K., B Experimental investigations on mixing of two biodiesels blended with diesel as alternative fuel for diesel engines, Journal of King Saud University-Engineering Sciences, 2014. pp.
Sahoo, P.K., Das, L.M. Combustion analysis of Jatropha, Karanja and Polanga based biodiesel as fuel in a diesel engine, Fuel, 2009. 88 pp. 994–999.
Süreyya, K.M., Heri, E., Utlu, Z. Experimental Study of Emission Parameters of Biodiesel Fuels Obtained from Canola , Hazelnut , and Waste Cooking Oils, Energy &fuel, 2007. 21: pp. 3622-3626.
Rakopoulos, C.D., Rakopoulos, D.C., Hountalas, D.T., Giakoumis, E.G., Andritsakis, E.C. Performance and emissions of bus engine using blends of diesel fuel with bio-diesel of sunflower or cottonseed oils derived from Greek feedstock, Fuel, 2008. 87: pp. 147-157.
Firestone, D. Offical methods and recommended practices of the AOCS, American Oil Chemists Society 1998. pp.
Chuah, L.F., Aziz, A.R.A., Yusup, S., Bokhari, A., Klemeš, J.J., Abdullah, M.Z. Performance and emission of diesel engine fuelled by waste cooking oil methyl ester derived from palm olein using hydrodynamic cavitation, Clean Technologies and Environmental Policy, 2015. pp. 1-13.
Yusup, S., Khan, M.A., Ahmad, M.M. Acid esterification of a high free fatty acid crude palm oil and crude rubber seed oil blend : Optimization and parametric analysis, biomass and bioenergy, 2010. 4: pp. 3-8.
Bas, D., Boyacı, I.H. Modeling and optimization I: Usability of response surface methodology, Journal of Food Engineering 2007. 78: pp. 836–845.
Bezerraa, M.A., Santelli, R.E., Oliveira, E.P., Villar, L.S., Escaleira, L., Am´elia. Response surface methodology (RSM) as a tool for optimization in analytical chemistry, Talanta, 2008. 76: pp. 965–977.
Yusup, S., Bokhari, A., Lai Fatt, C., Ahmad, J. Pre-Blended Methyl Esters Production from Crude Palm and Rubber Seed Oil Via Hydrodynamic Cavitation Reactor, CHEMICAL ENGINEERING TRANSACTIONS, 2015. 43: pp. 517-522.
Bokhari, A., Yusup, S., Nik M. Kamil, R., Ahmad, J. Blending Study of Palm Oil Methyl Esters with Rubber Seed Oil Methyl Esters to Improve Biodiesel Blending Properties, CHEMICAL ENGINEERING TRANSACTIONS, 2014. 37: pp.
Abuhabaya, A., Fieldhouse , J., Brown, D. The effects of using biodiesel on CI (compression ignition) engine and optimization of its production by using response surface methodology, Energy, 2013. 59: pp. 56-62.
Umer, R., Farooq, A., Muhammad, A., Muhammad, S., Yusup, S. Application of response surface methodology for optimizing transesterification of Moringa oleifera oil: Biodiesel production, Energy conversion and Management, 2011. 52 (8): pp. 3034-3042.
Xingzhong, Y., Jia Liu, G.Z., Jingang, S., Jingyi, T., Guohe, H. Optimization of conversion of waste rapeseed oil with high FFA to biodiesel using response surface methodology, Renewable Energy, 2008. 33: pp. 1678–1684.
Halim Abdul, F.S., Kamaruddin, A.H., Fernando, W.J.N. Continuous biosynthesis of biodiesel from waste cooking palm oil in a packed bed reactor : Optimization using response surface methodology ( RSM ) and mass transfer studies, Bioresource Technology, 2009. 100 (2): pp. 710-716.
Sanjid, A., Hassan, M.H., Md Abul, K., SM Ashrafur, R., Md Joynul, A., Ali, S. An experimental investigation of biodiesel production, characterization, engine performance, emission and noise of Brassica juncea methyl ester and its blends, Journal of Cleaner Production, 2014. 79: pp. 74-81.
Muralidharan, K., Vasudevan, D. Performance , emission and combustion characteristics of a variable compression ratio engine using methyl esters of waste cooking oil and diesel blends, Applied Energy, 2011. 88: pp. 3959-3968.
Yuan Lin , C., Ji Li, R. Engine performance and emission characteristics of marine fish-oil biodiesel produced from the discarded parts of marine fish, Fuel Processing Technology 2009. 90: pp. 883–888.
Ganapathy, T., Gakkhar, R.P., Murugesan K. Optimization of performance parameters of diesel engine with Jatropha biodiesel using response surface methodology, International Journal of Sustainable Energy 2011. pp. 1-15.
Yusuf, A., Kent M, E., Milford A, H. Testing of alternative diesel fuel from tallow and soybean oil in Cummins N14-410 diesel engine, Bioresource Technology, 1995. 53 (3): pp. 243-254.
Yusuf, A., Milford A, H., Louis I, L. Emissions and power characteristics of diesel engines on methyl soyate and diesel fuel blends, Bioresource Technology, 1995. 52 (2): pp. 185-195.
Yusuf, A., Milford A, H., Joseph E, B. Optimization of diesel, methyl tallowate and ethanol blend for reducing emissions from diesel engine, Bioresource Technology, 1995. 52 (3): pp. 237-243.
Hirkude, J., Padalkar, A., Shaikh, S., Veigas, A. Effect of Compression Ratio on Performance of CI Engine Fuelled with Biodiesel from Waste Fried Oil Using Response Surface Methodology, International Journal of Energy Engineering, 2013. 3 (5): pp. 227-233.
Downloads
Published
Issue
Section
License
- Papers must be submitted on the understanding that they have not been published elsewhere (except in the form of an abstract or as part of a published lecture, review, or thesis) and are not currently under consideration by another journal published by any other publisher.
- It is also the authors responsibility to ensure that the articles emanating from a particular source are submitted with the necessary approval.
- The authors warrant that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required.
- The authors ensure that all the references carefully and they are accurate in the text as well as in the list of references (and vice versa).
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Attribution-NonCommercial 4.0 International that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
- The journal/publisher is not responsible for subsequent uses of the work. It is the author's responsibility to bring an infringement action if so desired by the author.
