Best Multiple Non-linear Model Factors for knock Engine (SI) by using ANFIS
Keywords:
Knocking, ANFIS, linear regression, Throttle position sensor (TPS), Revolution per minute (RPM).Abstract
Knock Prediction in vehicles is an ideal problem for non-linear regression to deal with, which use many of the factors of information to predict another factor. Training data were collected through a test engine for the Malaysian Proton company and in various states of speed. Selected six influential factors on the knocking (Throttle Position Sensor (TPS), Temperature (TEMP), Revolution Per Minute (RPM), (TORQUE), Ignition Timing (IGN), Acceleration Position (AC_POS)), has been taking data for this study and then applied to a single cylinder, output factor (output variable) to be prediction factor is a knock. We compare the performance of resultant ANFIS and Linear regression to obtain results shows effectiveness ANFIS, as well as three factors were selected from six non-linear factors to get the best model by using Adaptive Neuro-Fuzzy Inference System (ANFIS). Experiments demonstrate that although soft computing methods are somewhat of tolerant of inaccurate inputs, cleaned data results in more robust models for practical problems.
Â
References
J. B. Heywood, Internal combustion engine fundamentals vol. 930: Mcgraw-hill New York, 1988.
K. M. Chun, "Characterization of knock and prediction of its onset in a spark-ignition engine," Massachusetts Institute of Technology, 1988.
G. Konig and C. Sheppard, "End–gas auto–ignition and knock in a spark ignition engine," Fuel, vol. 2013, pp. 09-12, 1990.
C. V. Ferraro, "A KNOCK INTENSITY METER BASED ON (A) KINETIC CRITERION," 1978.
R. Barton, S. Lestz, and L. Duke, "Knock intensity as a function of engine rate of pressure change," Training, vol. 2005, pp. 04-01, 1970.
C. V. Ferraro, M. Marzano, and P. Nuccio, "Knock-Limit Measurement in High-Speed S. I. Engines," Studies, vol. 2011, pp. 12-14, 1984.
W. Leppard, "Individual-cylinder knock occurrence and intensity in multicylinder engines," 1982.
M. B. Jain, M. K. Nigam, and P. C. Tiwari, "Curve fitting and regression line method based seasonal short term load forecasting," in Information and Communication Technologies (WICT), 2012 World Congress on, 2012, pp. 332-337.
H. Andrei, T. Ivanovici, G. Predusca, E. Diaconu, and P. C. Andrei, "Curve fitting method for modeling and analysis of photovoltaic cells characteristics," in Automation Quality and Testing Robotics (AQTR), 2012 IEEE International Conference on, 2012, pp. 307-312.
D. Tamhane, P. Wong, F. Aminzadeh, and M. Nikravesh, "Soft computing for intelligent reservoir characterization," in SPE Asia Pacific Conference on Integrated Modelling for Asset Management, 2000.
R. Ibatullin, N. Ibragimov, R. Khisamov, E. Podymov, and A. Shutov, "Application and method based on artificial intelligence for selection of structures and screening of technologies for enhanced oil recovery," in SPE/DOE Improved Oil Recovery Symposium, 2002.
W. W. Weiss, R. S. Balch, and B. A. Stubbs, "How artificial intelligence methods can forecast oil production," in SPE/DOE Improved Oil Recovery Symposium, 2002.
Y. Liu, B. Bai, Y. Li, J. Coste, and X. Guo, "Optimization design for conformance control based on profile modification treatments of multiple injectors in a reservoir," in International Oil and Gas Conference and Exhibition in China, 2000.
Downloads
Published
Issue
Section
License
- Papers must be submitted on the understanding that they have not been published elsewhere (except in the form of an abstract or as part of a published lecture, review, or thesis) and are not currently under consideration by another journal published by any other publisher.
- It is also the authors responsibility to ensure that the articles emanating from a particular source are submitted with the necessary approval.
- The authors warrant that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required.
- The authors ensure that all the references carefully and they are accurate in the text as well as in the list of references (and vice versa).
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Attribution-NonCommercial 4.0 International that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
- The journal/publisher is not responsible for subsequent uses of the work. It is the author's responsibility to bring an infringement action if so desired by the author.
