Polymer Optimisation- Shear Thinning or Thickening?
DOI:
https://doi.org/10.24203/ajas.v7i4.5808Keywords:
polymer, polymer optimisation, completion, shear thinning, shear thickeningAbstract
With most polymers employed in polymer enhanced oil recovery exhibiting one or both non-Newtonian behaviours that is shear thickening and thinning at different shear rate, it is expedient to analyse the impact of these non-Newtonian behaviours in polymer optimisation. CMG simulation suite was employed to analyse the permeability pinch-out formation with a five (5) spot injection well pattern for a 360days simulation run using a 90days polymer injection well cycling. Shear thinning polymer was found not to be conducive for lower permeable formation as a high percentage of the polymer was retained. NPV was affected by polymer injection rate which controlled polymer optimisationReferences
• Abdulbaki, M., Huh, C., Sepehrnoori, K., Delshad, M., Varavei, A., 2014. A critical review on use of polymer microgels for conformance control purposes. J. Petroleum Sci. Eng.122, 741–753.
• Al Ayesh, A.H., Salazar, R., Farajzadeh, R., Vincent-Bonnieu, S., Rossen, W.R., 2016. Foam diversion in heterogeneous reservoirs: effect of permeability and injection method.In: SPE Improved Oil Recovery Conference. SPE-199650-MS, Tulsa, Oklahoma, USA.
• AlSofi, A.M., Blunt, M.J., 2010. Streamline-based simulation of non-Newtonian polymer flooding. SPE 15 (04), 895–905.
• Alvarado, V., Manrique, E., 2010. Enhanced oil recovery: an update review. Energies 3(9), 1529–1575.
• Bai, Y., et al., 2015. Gelation study on a hydrophobically associating polymer/ polyethylenimine gel system for water shut-off treatment. Energy Fuels 29 (2), 447–458.
• He, J.Y., et al., 2008. Size effect on mechanical properties of micron-sized PS-DVB polymer particles. Polymer 49 (18), 3993–3999.
• Jones, W.M., 1980. Polymer additives in reservoirflooding for oil recovery: shearthinning or shear thickening? J. Phys. D Appl. Phys. 13 (5), L87.
• Jung, J.C., Zhang, K., Chon, B.H., Choi, H.J., 2013. Rheology and polymerflooding characteristics of partially hydrolyzed polyacrylamide for enhanced heavy oil recovery. J. Appl. Polym. Sci. 127 (6), 4833–4839.
• Li, R.F., Yan, W., Liu, S., Hirasaki, G., Miller, C.A., 2010. Foam mobility control for surfactant enhanced oil recovery. SPE 15 (04), 928–942.
• Liu, Y., Zhong, H., Peng, X., Zhao, C., 2015b. Factors influencing micro sweep efficiency when flooding a formation with viscoelastic polymer solutions. Chem. Technol. Fuels Oils 51 (2), 160–167.
• Thomas, S., 2008. Enhanced oil recovery - an overview. Oil Gas Sci. Technol. - Rev. IFP 63
(1), 9–19.
• Stavland, A., Jonsbraten, H., Lohne, A., Moen, A., & Giske, N. H. (2010, January 1). Polymer Flooding - Flow Properties in Porous Media versus Rheological Parameters. Society of Petroleum Engineers. doi:10.2118/131103-MS
• Shields, R., & Beteta, A. (n.d.). Scleroglucan for EOR. Heriot Watt University. In Press (unpublished) 2017
• Wang, D., Huang, D., Sunf, G., Uang, D.,., 2000. Viscous-elastic Polymer Can Increase Microscale Displacement Efficiency in Cores. SPE-63227-MS.
• Wei, B., Romero-Zer, Rodrigue, D., 2014. Oil displacement mechanisms of viscoelastic polymers in enhanced oil recovery (EOR): a review. J. Petroleum Explor. Prod. Technol. 4 (2), 113–121.
• Wever, D.A.Z., Picchioni, F., Broekhuis, A.A., 2011. Polymers for enhanced oil recovery: a paradigm for structure Cproperty relationship in aqueous solution. Prog. Polym. Sci.Top. Energy Relat. Mater. 36 (11), 1558–1628.
• Yan, W., Miller, C.A., Hirasaki, G.J., 2006. Foam sweep in fractures for enhanced oil recovery. Colloids Surfaces A Physicochem. Eng. Aspects 282–283, 348–359.
• Zhang, Y., Yue, X., Dong, J., Yu, L., 2000. New and Effective Foam Flooding to Recover Oil in Heterogeneous Reservoir. SPE-59367-MS.
Downloads
Published
How to Cite
Issue
Section
License
- Papers must be submitted on the understanding that they have not been published elsewhere (except in the form of an abstract or as part of a published lecture, review, or thesis) and are not currently under consideration by another journal published by any other publisher.
- It is also the authors responsibility to ensure that the articles emanating from a particular source are submitted with the necessary approval.
- The authors warrant that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required.
- The authors ensure that all the references carefully and they are accurate in the text as well as in the list of references (and vice versa).
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Attribution-NonCommercial 4.0 International that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
- The journal/publisher is not responsible for subsequent uses of the work. It is the author's responsibility to bring an infringement action if so desired by the author.