Improved High Voltage Gain Converter with Voltage Multiplier Module for Photo Voltaic Applications with MPPT Control
Keywords:
Boost fly back converter, Grid Connection, Modeling and Simulation, Maximum Power Point Tracking, Photovoltaic Energy, P & O MethodAbstract
This paper focuses on the latest development of modeling and simulation of the grid connected photovoltaic energy conversion system. The paper presents a closed loop high step up high voltage gain converter with a output voltage multiplier module for the photovoltaic application. Solar panel circuit can effectively extract maximum solar power from PV panel using maximum power point tracking technique. Modeling includes the modeling of SPV array, P & O MPPT block, Power electronics converter, inverter in the MATLAB/SIMULINK. The paper also discusses the power connection to the grid.
References
Sarah Ben Abraham, Riya Scaria ,“High Step- Up Dc-Dc Converter With Voltage Multiplier Moduleâ€, Proceedings Of Second Irf International Conference On 10th August 2014, Cochin, India, Isbn: 978-93-84209-43-8
Kuo-Ching Tseng and Chi-Chih Huang “High Step-Up High-Efficiency Interleaved Converter With Voltage Multiplier Module for Renewable Energy System†IEEE Transactions On Industrial Electronics, Vol. 61, No. 3, March 2014
K.C. Tseng and T.J. Liang , “Novel high-efficiency step-up converterâ€, IEE Proc.-Electr. Power Appl., Vol. 151, No. 2, March 2004
M. G. Villalva, J. R. Gazoli, E. Ruppert F. University of Campinas - UNICAMP, Brazil, “Modeling And Circuit-based Simulation Of Photovoltaic Arrays†Brazilian Journal of Power Electronics, 2009 vol. 14, no. 1, pp. 35--45, ISSN 1414-8862
Dorin Petreus, Cristian Farcas, Ionut Ciocan, “Modelling And Simulation Of Photovoltaic Cells†Acta Technica Napocensis Electronics And Telecommunications Volume 49, Number 1, 2008
Sonali Surawdhaniwar and Mr. Ritesh Diwan , “Study of Maximum Power Point Tracking Using Perturb and Observe Method†, International Journal of Advanced Research in Computer Engineering & Technology Volume 1, Issue 5, July 2012
Tekeshwar Prasad Sahu1, T.V. Dixit2 and Ramesh Kumar, “Simulation and Analysis of Perturb and Observe MPPT Algorithm for PV Array Using ÄŠUK Converter â€, Advance in Electronic and Electric Engineering. ISSN 2231-1297, Volume 4, Number 2 (2014), pp. 213-224
Habbati Bellia, Ramdani Youcef, Moulay Fatima “ A detailed modeling of photovoltaic module using MATLAB†NRIAG Journal of Astronomy and Geophysics (2014) 3, 53–61
Y. P. Hsieh, J. F. Chen, T. J. Liang, and L. S. Yang, “Novel high step-up DC–DC converter for distributed generation system,†IEEE Trans. Ind. Electron., vol. 60, no. 4, pp. 1473–1482, Apr. 2013
D. Wang, X. He, and J. Shi, “Design and analysis of an interleaved flyback–forward boost converter with the current autobalance characteristic,†IEEE Trans. Power Electron., vol. 25, no. 2, pp. 489–498, Feb. 2010
Y. Jang and M. M. Jovanovic, “Interleaved boost converter with intrinsic voltage-doubler characteristic for universal-line PFC front end,†IEEE Trans. Power Electron., vol. 22, no. 4, pp. 1394–1401, Jul. 2007.
T.J. Liang and K.C. Tseng “Analysis of integrated boost-flyback step-up Converterâ€, IEE Proc.-Electr. Power Appl., Vol. 152, No. 2, March 2005
Rong -Jong Wai, Member, IEEE, and Rou-Yong Duan, “High Step-Up Converter With Coupled-Inductorâ€, IEEE transactions on power electronics, vol. 20, no. 5, September 2005
Gustavo A. L. Henn, R. N. A. L. Silva, Paulo P. Prac¸a, Luiz H. S. C. Barreto, Member, IEEE, and Demercil S. Oliveira, Jr “Interleaved-Boost Converter With High Voltage Gainâ€, IEEE transactions on power electronics, vol. 25, no. 11, November 2010
Downloads
How to Cite
Issue
Section
License
- Papers must be submitted on the understanding that they have not been published elsewhere (except in the form of an abstract or as part of a published lecture, review, or thesis) and are not currently under consideration by another journal published by any other publisher.
- It is also the authors responsibility to ensure that the articles emanating from a particular source are submitted with the necessary approval.
- The authors warrant that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required.
- The authors ensure that all the references carefully and they are accurate in the text as well as in the list of references (and vice versa).
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Attribution-NonCommercial 4.0 International that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
- The journal/publisher is not responsible for subsequent uses of the work. It is the author's responsibility to bring an infringement action if so desired by the author.